Publication

Measurement Report: Safety Washer Measurement

In this measurement report summary, we describe the use of the Bruker Alicona G-Series InfiniteFocus to measure safety washers to ensure they meet specification and comply with the relevant ISO standard.

Learn more about

These measurements were made with the InfiniteFocusG4, this is the previous version to the current InfiniteFocusG5 plus. Using this instrument, it is possible to easily measure all these parameters quickly, easily and repeatably.

The parameters to be measured are

  • Pitch of Cams/serrations
  • Radius on the top of the cam/serration
  • Radius on the bottom of the cam/serration
  • Surface roughness of serrations/cams

>> Read the Application Note "Safety Washer Measurement"

Share with your colleagues: